LEGEND :

Function is Supported.

Function is NOT Supported.

Warning - Check Notes .

NOTES :

(1): Connect the Telematics device using the HRN-MCAR-01 directly to the BLACK RS232 Port.

(2): Blade-AL (64) MUST be used for full connectivity with remote starter functions.

(3): Engine Will Start

(4): Must enable in remoe starter menu option: Smart Phone Baud Rate to Option #1 (9600).

(5): Connect the Telematics device using the HRN-MCAR-01 + HRN-LLRS-01 with White 4 pin connector. Connect to White Data port on side of Remote starter unit.

(6): NOT RECOMMENDED ON MANUAL TRANSMISSION MODE.

(7): NOT compatible

(8): Connect the Telematics device using the HRN-MCAR-01 directly to the BLUE RS232 Port.

(9): Power and Ground required only.

(10): AUX will work only in data using a bypass module. Analog wires will have no output.

(11): Connect the Telematics device using the HRN-MCAR-01 + HRN-DRS-02 with Tan 4 pin connector.